Programmable Logic Controller CANNY•5.2 Duo

Buy now

Please consider this device [CANNY•7.2 Duo](/c72duo)

CANNY•5.2 Duo -- advanced experimental programmable logic controller with two independent CAN interfaces - the next development stage of the CANNY•5.2 Duo controller.

This controller allows you to organize parallel operation with two independent CAN networks or build a high-speed CAN-gateway with flexible filtering / modification of messages in both directions, which can be repeatedly reconfigured while the controller is operating. Loading software to the controller by means of a USB-A - miniUSB cable-adapter.

I / O Channels

  • 3 of I/O channels that can work in both the output and input modes
  • The maximum current on each of the input / output channels is 100mA, the maximum total load current is 300mA
  • The maximum permissible voltage on the controller channels must not exceed 18V

Controller Interfaces

  • Two independent interfaces CAN 2.0B
  • UART/USB Virtual COM-Port

PWM / Counters

  • 3 channels of the controller can work in the mode of the asymmetric inputs-counters

ADC

  • 1 channel ADC, 12-bit resolution, designed to measure voltage up to 15V

Parameter

Value

Total count of IO channels

3

High side HP

--

Low side HP

3

Inputs

3

LP Current, max

100mA / 300mA

IO Voltage, max

18V

CAN 2.0B

2

UART

1 (USB VCP)

USB

1

ADC

1

Firmware update via

USB VCP

Supply

9...18V

Current consumption, max

40mA

Current consumption, min

5mA

LxBxH, mm

71x29x18